倉庫 SUP ボード サーフボード スタンドアップパドル 二層 PVC インフレータブルパドル

基礎情報

モデル番号。	AY-ST-028
応用	ウォータースポーツエリア
認証	CE
アクセサリー	ハンドポンプ + バックパック + リード + 修理
対象者	ユニセックス
重さ	11kg---17.5kg
サイズ	オーダーメイド
デザイン	オーダーメイド
輸送パッケージ	内袋＋箱
仕様	305×76×15cm
商標	OEM
起源	中国
HSコード	89031000
生産能力	1ヶ月あたり1000

製品説明

商品名	在庫 SUP ボード サーフボード スタンドアップパドル PVC 二重層パドル インフレータブルパドル
モデル番号	AY-ST-028
対象者	ユニセックス
原産地	中国
材料	PVC
アクセサリー	ハンドポンプ + バックパック + リード + 修理
サイズ	300*76*15センチメートル; 320*80*15センチメートルまたはカスタマイズされた
重さ	11kg---17.5kg
最小注文数量	50枚
パッケージ	内袋＋箱
認証	CE

FAQ1.What kind of guarantee you can be given?We guarantee all the product will be good at least 1 year;defective products will be changed by a free replacement after confirmed because of Quality problem.2.What kind of wear and tear should I watch for?Besides a small leak or tear you should check around all the valves and seams once in a while to make sure they are secure and not leaking any air.You can do this by using soap and water mixture in a spray bottle.Other wear and tear to be aware of is any breaking down of the material or stains that should eventually be removed with acleaner.3.How should I store it?Store it in a dry place away from direct exposure to hot sunlight or cold conditions.Deflated and rolled into its carry bag, it can be stored in any small space such as in a closet or garage.The important thing to remember is to make sure it is completely dry before packing it away so you don't end up with mold and mildew to clean up later.4.How long does an flat surfboards take to inflate?With a hand pump,it will take about 4 - 8 minutes. With a good electric pump it can take 30 seconds to 1 minute.the barometric needle points to 15PSI5.What should I pay attention to when using it for the first time?After receiving the sup, please check if the product is damaged due to transportation, and make sure it is inflated before it is damaged.1. The first charge is recommended to inflate 80% and put it for 8 hours (spring, summer, autumn and winter) and put it into use.This can effectively extend the service life of the inflated product due to the need for a buffering process inside the product.2. The temperature in winter is low. Although the cold resistance index of our products reaches the market standard, PVC products will become hard and brittle at low temperatures during the delivery process. In order to prolong the service life of the products, it is recommended to be placed indoors for more than 24 hours. Re-inflate, otherwise it will easily cause rupture at the crease and cause air leakage.